Description
This series of 3 Stage chargers have 3 specific settings for Wet, Cal-Cal, AGM & GEL type batter y to ensure fast, complete and safe charging of your battery as required by the manufacturers.
Soft Start Bulk Charge an pre-bulk charge for drained out battery.
The charger gives 50% of full constant current charge when it detects the battery is over depleted at less than 9V terminal voltage. When battery voltage rises to 11V the charger will resume the normal constant full current Bulk, constant voltage Absorption and Float charge stages.
In the Power Supply mode, the charger provides a constant voltage dc power to the external load connected to the battery and at the same time without over charging the battery. This is ideal for caravan and other battery backup applications. The Power Supply Mode output voltage is the selected Float Voltage.
The optional temperature sensor adjusts the charging voltages with the changes in ambient temperatures of the battery. This effectively prevents over and under charging the battery in hot summer days to cold wintry nights.
Only the 10Amp SBC-2110 model has convection cooling and one charging bank, others have thermal control fan cooling (zero to full speed) and dual charging banks.
The Over Voltage protection, in the case of component failure causing uncontrolled high voltage at the output, the charger will limit the
voltage less than 17.5V to prevent damage to the battery and connected load.
Soft Start Bulk Charge an pre-bulk charge for drained out battery.
The charger gives 50% of full constant current charge when it detects the battery is over depleted at less than 9V terminal voltage. When battery voltage rises to 11V the charger will resume the normal constant full current Bulk, constant voltage Absorption and Float charge stages.
In the Power Supply mode, the charger provides a constant voltage dc power to the external load connected to the battery and at the same time without over charging the battery. This is ideal for caravan and other battery backup applications. The Power Supply Mode output voltage is the selected Float Voltage.
The optional temperature sensor adjusts the charging voltages with the changes in ambient temperatures of the battery. This effectively prevents over and under charging the battery in hot summer days to cold wintry nights.
Only the 10Amp SBC-2110 model has convection cooling and one charging bank, others have thermal control fan cooling (zero to full speed) and dual charging banks.
The Over Voltage protection, in the case of component failure causing uncontrolled high voltage at the output, the charger will limit the
voltage less than 17.5V to prevent damage to the battery and connected load.
- 3 Stage (IUoU) switching mode lead acid battery charger.
- 3 Battery Type (Wet/ Cal-Cal/ AGM & GEL) selections.
- 3 Float Voltage Settings (13.2/13.5/13.8V) selections.
- Battery can be connected to charger permanently.
- Power Supply/Charger Mode selection
- The power supply mode is ideal to charge battery with load and keeps battery fully charged.
- Automatic Soft Start Bulk Charge to ensure a safe and gentle initial charging for deeply drained battery.
- Temperature compensation with optional remote sensor to prevent over and under charging battery at high and low ambient battery ambient temperature.
- Dual LED indicators for Bulk, Absorption, Float charge stage; Fault, Power/ Charger Mode and Power On.
- Power On-Off Switch.
- Silent fan cool operation--The thermal control cooling fan with variable speed moves when ambient temperature of charger exceeds 40°C.
- Protections to the charger Short circuit, Over Load, Over temperature.
- Reversed Polarity (thermal fused).
- Protection to the battery and load OVP
- The charger will keep output voltage less than 17.5V to prevent damage to the battery and load.
